Cold Insulation

Cold Insulation will be applied to Vessels / equipment and piping of temp. range -200 c to 20 c and below .

Where reduction of Heat gain and prevention of surfaces from condensation is desired. Cold Insulation Make / Service prevent heat from penetrating. They are also vaper and diffusion tight. This prevents corrosion damage, the formation of condensation and moisture prevention of the insulation layer

General Application Methods

  • Cleaning Rust and Dust to be insulated surface with Wire Brush
  • Application of one Coat anticorrosive paint like bitumen / primer or over the pipe and Vessels / equipment surface area.
  • Application of Cold Insulation Material / service with Cold / Hot Bitumen and Sealing the joint with Primer / Sealant / Putty Properly
  • Application / fixing  vapor Barrier over the insulation method. Black Plastics  / Fiberglass Cloth
  • Metal Fished with cladding sheet with proper grooved with joint on water proofing and for reinforcement with self tapping screw or SDS Screw or POP Rivet

The Material used for Cold Insulation

  • PUF / PIR : up to –200 Degree Celsius

  • Nitrite Rubber : up to -200 Degree Celsius

  • Thermocol : up to -25 Degree Celsius
  • Xipe = up to -20 Degree Celsius

    And many more as per client requirement

© Copyright - 2023-2024 Ask Insulators